Field Crops

Our products are effective with any type of plant; increasing yield, stand strength, and support against various diseases. Many university studies and independent field tests have been conducted proving the benefit of adding our product to your present fertilizer program. In these research studies, any plant that was researched had positive results. More research is being conducted on other varieties of fruits with results expected to be the same. Please see the research section if you are interested in what has been done. Below is an outline of general recommended guidelines when using our three products.

SeaCide Directions: Adequate coverage of plant leaves is necessary to provide disease and insect control. SeaCide prevents fungal attack on plant tissue and direct contact activity to insect pressures on the plant. Apply until plant runoff for maximum benefit.

For best mixing performance, do not mix SeaCide with water colder than 40 degrees Fahrenheit. Add sufficient water to the mixing tank before adding SeaCide to allow proper agitation. Add SeaCide when the tank is 1/2 to 3/4 full filling the remainder with water to form a milky appearing solution. For optimum results, keep constant agitation until the solution is used. For application in small equipment without agitation, stir or shake the solution frequently while applying. Care should be exercised in application timing to early moring or late evening to minimize potential for leaf burn and evaporation.

Fungicide Use: Apply SeaCide at a rate of 1% solution per acre. Repeat application every 7-14 days. For low volumes apply 1 quart of SeaCide in a minimum of 5 gallons of water.

Insecticide Use: Apply SeaCide at first sign of pest damage at a 0.5-1% solution in sufficient water to ensure thorough coverage of plant and leaf surface. Repeat application as needed for adequate control every 7-14 days. Larger more mature crops will need higher amounts of water to ensure complete coverage.

OmegaGrow and OmegaGrow Plus Directions : Shake well before opening. Separation may occur during storage and shipments. Apply this product only when diluted with water for the desired applications and directions that follow. Do not store or save mixed solutions. Use all that you mix within 24 hours.

Application: Soil - Apply 2 to 3 gallons at planting as a starter in conjunction with a sound fertility program.

Foliar - Apply at a 1 to 2% spray solution when plants are at the 4 to 8 inch stage and again at 30 to 40 days after planting.